I cant tell you how freaking annoying these pics were to uplaod. I kept having problems. I would have to uplaod like three pictures at a time because i would end up having to re uplaod one like every time -_- it took so long it was so annoying, but now i can finally get to the good part, the commentary! :D Oh, and i also forgot to turn some from large to center D:
Anyways here we see the back side of the moc. Overall, as with most of my MOCs, i think this turned out well. Although im a bit disapointed with the triangular front, took a lot of work and didnt come out as cool looking as i hoped, although it is a interesting shape that i hope will get this attention. Now that i think about i could have also given this some sort of small vehicle to carry.. o well, now onto the sci-fi commentary
The P-36 is a troop transport capable of atmouspheric and non atmouspheric conditions. The p-36 also has the ability to enter autmousphere from outer atmousphere. Alone, the P-36's shape and overall flight ability would not sustain re-entry, but the P-36 has an assest that gives it this ability and also keeps it safe while dropping troops into hotzones. Its heavy shielding. The P-36 relys on extremly durable shields as its protection and its flight stabilizer. The shields shape are manipulated to spread out and around the force and heat from re-entry, giving it the ability to survive re-entry. General during re-entry the shields will be manipulated to a cone shape to desperse the energy from re-entry that would generally make this inpossible. The entire front of the section of the P-36 under the cocpit houses only the emense shield generator and carrys the shielding dispersing coil directly under it (and you thought that was a gun..) Although this technique can be useful, certain weapons can be devastation on large groups of transports entering atmousphere. For instance, an IMP blast amoungst a large amount of transports can be devastating, instantly disengaging shields and turning every one of them into flaming balls of alloy. The P-36 is armed with a heavy machine gun on the top which is controlled by a gunner but can also be automatic, and also rear lower gatling guns used for clearing landing zones, which can also be automatic or manually controlled. The P-36 has 4 engines that can turn 360 degrees, mainly for non-atmouspheric flight.
Grebbles! :D and an uper hatch that can be used when the rear hatch is un-opperational
Opens up top..
..and unfolds out as a ramp :D
Full o troopers, the P-36 can hold about 9 people, including the pilot and gunner.
Pretty spacious, the P-36 is sometimes also used as a cargo ship, supllying troops on the front lines.
Pilot. There is no windshield, the cocpit relys solely on a clear energy shield. Negates worries like fogging and keeps you terified of shield disabling EMP blasts!
On to the minifigures. Here we have the gunner on the left, center we have the pilot, and on the right we have the medic
Left we have explosives dude (that sounds REAL profesional) center we have a heavy armored trooper, and on the right we have the sqaud leader
Infantry! On the left we have a dude with a shotgun, center a sniper, and right a rifle.
The fron can be fairly easily dis-assembled. You just got to take off this leadlight piece thing..
Then the long piece the pilot is one and the front come out easily..
..and you can see how this is made! Its barely connected and is held on mainly my friction!Lol this pic messed up
Alternate design! :D i decided to change the cocpit and make an alternet design, and i was really frustrated because it looked as cool if not cooler as the original cocpit and took not even close to as long -_-
Acidently made this huge :P The stand for this one was kind of annoying, as can be seen below. This second design is cool but it doesnt have the room for the giant shield generator or rear gun, but it looks cool. Maybe this one is another design specifically for in-atmouspheric conditions? :o
Lol this is a picture of my hand i accidently as i tried to grab my dropship as the stand fell over, thought id put it on for fun xD
Sorry i havent added anything recently, i havent been doing a lot of legos, been distracted by a lot of things. Ive recently moved and i have my own room now, but i dont have that much room for legos, and schools been heavyer this year, and ive been spending more time with video games and junk in my free time :P i have been doing some legos and i want to start doing it some more. I have something i want to put on, so look out for that soon-ish! :D ahh it feels good to be dooing this again... but i feel like my commentary isnt that good :P tell me what you guys think, rate and comment! :D
Hello; this is a message from the Administrators of the "United Nations of Earth Alliance" group. We're are cleaning out our inactive members and requesting that you either leave the group or become active again. Don't worry, we're sending this out to all our members, so we're not singling you out. We hope we you can become a great, active member but understand if you no longer wish to continue with us. You have until November 8, 2010 to respond to this message in the following topic; http://www.mocpages.com/group_conversation.php?id=154&topicid=59902 Hope to here from you!