Engine 1 is a 2010 Pierce Arrow XT 1500 / 700 rescue engine. Equipped with 2 hurst combi tools, one generator pack and 1 mounted into the bumper, the front mounted combi was removed shortly before these photos. also equipped with full rapid intervention ALS equipment, 1x 45mm attackline, 2x110mm Supply, and 2x90mm and 2x45mm rolls.
also equipped with a 60m high pressure hose reel in nearside 3, fitted with a special bracket the hose reel can be spun allowing access from the side or rear of the apparatus, this feature has been less than successful and was not included on the next batch.
Engine 1 was the first delivery of a new batch of rescue pumpers based on the XT chassis, a further 3 are expected to replace Engines 2, 3, and 7 and are improved with the addition of a further preconnect over the pump panel, and an improved hosebed.
About this creation
Credits are to Bruce B for his technical support and assistance.
to either Alex W or Christan C for the headlight mod.
and to Paul B and Bob K as usual for the piercey look i stole many years ago.