I have worked on polishing both trucks and made their systems exactly the same,
to apply the solution twice.
I have faithfully reproduced your design and it works perfectly.
this is what it looks like fitted with the truck.
it scales well with the figs, and I love what the system looks like, but, it s too wide compared with the rest of the fleet.
the container backload system is too loose to hold the containers, but, I definitively
want a backload system now.
by moving the shovel and broom further in the front, I could use a '1' with a hole
to insert a stiffer part like this, with a black pin, or, maybe you can figure something.
as I mentionned before, I m working on gimp,
these adds are the first good results,
you can copy-paste those on your stories if you can.
these are all old pics, but, I will make new ones soon,
I m on 2 weeks vacation.
here I made a mushroom containers as you explained,
but, I m not sure that I have the rest,
here is what I have to fill the machines according to your design,
I also have normal flower tops, but, it won t do as caps.
I plan to make commercials with 'Pinky toy'
these are pretty much all the machines that I have,
notice that they have prints for controls,
but, I m willing to change them for a more easier 'standard'
to make sure machines are exactly the same on your system,
with only one type of product per machine,
it does nt need to be so complicated anyways.
they should appear in the money man, and tales of alta-5.
to Nick, I hope it will help.
the back with door removed
the door frame.
for Nick White,
this is the panel to reproduce, I don t know how high you can make it,
but, a little over the fig s height should do,
it s 16x2x19 high.
THIS IS A WORK PAGE!
THIS IS A COOP TOOL!!!
IT IS MEANT TO BE ERASED REGULARLY!!!
IT IS FOR TEMPORARY PURPOSES!!!
DEMOS, WORK IN PROGRESS, FIG HEADS, TORSIOS, AND SUCHES!
it is also a STATEMENT to change our wasteful ways on the FREE moc pages!
a more RESPONSIBLE way to manage it s performance!!!
this is a tool between members of the federation,
to show pictures of demos,
parts, and ideas!
Great job, and I noticed the modification you made to keep the arms from hitting the ground. I will upload a couple of pics for you in a day or two. It's so exciting to see my design in real brick, thank you.
Here is the video, I hope it clears everything up for you. http://youtu.be/KZ8-feWu4ow When you are done, it should clip in place of the old design without any mods. Just put the broom and shovel on the front part of the body and you're set!
Quoting Nick White
ok, it was best that I know as soon as possible, we ll reverse this, you make a 16x2x19 high panel then, try to make it as light gray as you can, I will copy it, and integrate it in my design!
Don't worry. I will help you as soon as I can. Maybe download LDD and I can post the instructions? If not I will break it all down and maybe screen cap them or something. I just started a new job but I will find time in the next couple of days for sure. I want to see this happen!