MOCpages : Share your LEGO® creations
LEGO models my own creation MOCpages toys shop OnagerHalo
Welcome to the world's greatest LEGO fan community!
Explore cool creations, share your own, and have lots of fun together.  ~  It's all free!
Onager
Send me out... With a bang!...
About this creation
My entry to The punked contest

www.mocpages.com/group.php
for the Cyber punk category



I chose the M2488 'Onager' for my entry into the punked contest because I think it had a realy unique cyber-punk feel to it. As always, I'm the ONLY person on MOC pages with a model like this;(I've checked), 'Feels good to be unique don't it?



Basically, for any non-halo players and-or trivial maniacs, M.A.C stands for Magnetic-Acceleration-Cannon/Coil, despite being a fairly futuristic subject, technology like this actually exists.



This is my first created MOC this year, I got a new camera, two new tripods and enough time to tidy up the ol' workshop.



+ you may have seen my animations, if not- check them out, they were a few little things I got together before christmas and I can tell you more are on the way.












Sarges notes:
This is my first contest entry MOC ever so I hope it makes a good impression.

As my obsession with halo reach reaches critical levels, my workshop is literally exploding with half finished MOCs either inspired or cut short due to gameplay hours.
Thankfully none of you are that insane, I shall stay here, trollin' along in my special fortress, my house of Insanity.



Comments

 I like it 
  February 15, 2012
Wow very accurate!
 I like it 
  February 2, 2012
nice job and funny you quoted the achievment. this looks ALMOST exact. why i say that is because the rails look a little shorter than the referance pic, and thats my opinian. its nice and cool and im thinking of making my own variant.
 I made it 
  December 13, 2011
Quoting eli moore! this is so beast
Glad you like it...
 I like it 
  December 13, 2011
this is so beast
 I made it 
  October 14, 2011
Quoting Aaron Gonzalez Your MAC Cannon is very nice. I'll make a bigger one and i'll post the link to it when i'm done with it :)
thanks, good luck Aaron
 I like it 
  October 14, 2011
Your MAC Cannon is very nice. I'll make a bigger one and i'll post the link to it when i'm done with it :)
 I made it 
  August 2, 2011
Quoting Eber Kain Very cool looking build, I've been contemplating making something like this that fires, using a power functions kit, but I dont have a good idea for the firing mechanism yet.
i like that idea. remember, the key to using power-functions is plan your space: most are large. make the interior top priority.
 I like it 
  August 2, 2011
Very cool looking build, I've been contemplating making something like this that fires, using a power functions kit, but I dont have a good idea for the firing mechanism yet.
 I like it 
  July 30, 2011
If you make it bigger, and create a cabin as opposed to an open air control panel, then this is perfect! I've considered making one myself.
 I like it 
  March 28, 2011
Great build. It looks really well built.
 I made it 
  March 18, 2011
Quoting Cpt Mugwash Nice work, looks very haloesque, I love halo too although I haven't been playing as frequent as I use to. A few suggestions if you are looking to improve, I'd make the base round using dark/light bley Brick, Round Corner 10 x 10 with Slope 33 Edge, Axle Hole, Facet Cutout also I'd add some kind of fence like in the pic. Good job!
Thanks, I considered adding some fence pieces but I got around to building the MOC and found I only had two or three matching pieces. The rounded base is a good idea, I'll try to touch up on the turntable.
 I like it 
  March 18, 2011
Nice work, looks very haloesque, I love halo too although I haven't been playing as frequent as I use to. A few suggestions if you are looking to improve, I'd make the base round using dark/light bley Brick, Round Corner 10 x 10 with Slope 33 Edge, Axle Hole, Facet Cutout also I'd add some kind of fence like in the pic. Good job!
 I made it 
  March 17, 2011
Quoting Eric 'Hawk' Mickle Can you give me a link to where it says that it is a MAC, and not just a Mass Driver?
http://halo.wikia.com/wiki/Onager <- clues in the name...
  March 17, 2011
Can you give me a link to where it says that it is a MAC, and not just a Mass Driver?
 I like it 
  March 15, 2011
so lovely!!
 I made it 
  March 14, 2011
Quoting Eric 'Hawk' Mickle Actually a Mass Driver is different from a MAC, and I remember Captain Connor Patterson did a model like this-http:/mocpages.com/moc.php/233721. This still is very impressive. >Eric
Connor created a MDC, not a MAC. It looks similar to mine but is nothing like the Onager in halo reach.
 I like it 
  March 14, 2011
Actually a Mass Driver is different from a MAC, and I remember Captain Connor Patterson did a model like this-http://mocpages.com/moc.php/233721. This still is very impressive. >Eric
 I made it 
  March 12, 2011
Quoting Josiah Blake AWESOME! I have never seen a lego version of this. You have set the standard VERY high for anyone wanting to post one of these. I like it.
Onager beats EVERYTHING!!!
 I made it 
  March 12, 2011
Quoting C. Alexander Clay Nice build, and finaly a creation in the Cyberpunk category!
Cyber punk is awesome, I still don't know why there aren't that many in this competition.
  March 11, 2011
AWESOME! I have never seen a lego version of this. You have set the standard VERY high for anyone wanting to post one of these. I like it.
 I like it 
  March 11, 2011
Nice build, and finaly a creation in the Cyberpunk category!
 
By Jonathan Rogers
Add to my favorite builders

22
people like this. See who.

2,098 visitors
21 comments
Added March 11, 2011
 


LEGO models my own creation MOCpages toys shop OnagerHalo


You Your home page | LEGO creations | Favorite builders
Activity Activity | Comments | Creations
Explore Explore | Recent | Groups
MOCpages is an unofficial, fan-created website. LEGO® and the brick configuration are property of The LEGO Group, which does not sponsor, own, or endorse this site.
©2002-2014 Sean Kenney Design Inc | Privacy policy | Terms of use