MOCpages : Share your LEGO® creations
LEGO models my own creation MOCpages toys shop GN-0000 00 Gundam and VariantsMecha
Welcome to the world's greatest LEGO fan community!
Explore cool creations, share your own, and have lots of fun together.  ~  It's all free!
GN-0000 00 Gundam and Variants
The main Gundam from the Gundam 00 Anime, as well as the 00 XN Gundam from the 00 Gundam V manga. Kudos go out to the talented (and generous) Thomas Z for the head (re)design.
About this creation
Features:

-Cockpit space for minifig in chest
-High degree of poseability
-Ability to crouch completely
-Sliding knee armor
-Moveable shoulder armor allows for greater mobility
-Bending toes
-Rotating waist
-Includes two GN Sword IIs that can convert between rifle and sword mode and have telescoping stocks
-Includes two GN shields that can be attached to GN Drives or combined into one large shield
-GN Drives are mounted on swing arms that allow them to accommodate nearly any arm movement.
-XN Unit easily is attached or removed from 00 Gundam without removing parts
-GN Buster Sword IIIs on the XN unit can be removed and held by 00 Gundam
-Servo arms hold GN Sword IIs and can wield them as well

Front View



The 00 Gundam's Twin GN Drives are fully moveable, and can pivot completely to the front and rear arcs.



The swing arms on the drive mounts allow for even more mobility



Rear View: Showing GN drive mobility



The 00 Gundam's GN Sword IIs can switch between sword and rifle mode and store on the hips of the mobile suit on small pegs.



Front View: Equipped with GN Sword IIs



Side View: Equipped with GN Sword IIs



Rear View: Equipped with GN Sword IIs



The only other on-board weapons that the 00 Gundam carries are a pair of beam sabres that are stored on the rear hip armor and pivot out to the sides for the Gundam to grasp



As auxilliary equipment, the 00 Gundam sports a pair of GN shields that have small GN blades incorporated into them. The shields can be store on the GN Drive mounts when not in use.



The shields can also be combined into a single larger shield and mounted on a forearm



Flying and shooting



The 00 Gundam is an extremely agile unit due to its Twin Drive vernier system




GN-0000/XN 00 XN Gundam


A little-known variant on the 00 Gundam, it was only featured in the manga. It provides extra weapons and propulsion for the 00 Gundam.

The 00 Gundam and the XN unit shown separately. While it looks similar, it is not the same unit at the XN Raiser.



Front View



Rear View



Like the XN Raiser, the 00 XN Gundam features two GN Buster Sword IIIs, a highly advanced refinement of the GN Buster Sword II found on the 00 Gundam Seven Sword.



Building instructions
Download building instructions (LEGO Digital Designer)

Comments

Mithryl Altaire
 I like it 
Geovanny Hillis
  July 18, 2013
I would say I love it but I can't.... It took my breath away! ;)
 I made it 
  October 22, 2011
Quoting Marcus Jackson Alright man thanks, I'll look into it. You still building? Did you finally give up on that meteor unit? Good hearing from you anyways.
I am still building but slowly. There's a lot going on for me right now, so building has to wait. I'm still going to make the METEOR Unit, but I need a much more powerful computer before I can.
 I like it 
  October 22, 2011
Alright man thanks, I'll look into it. You still building? Did you finally give up on that meteor unit? Good hearing from you anyways.
 I made it 
  October 22, 2011
Quoting Marcus Jackson question: does this fit a fig? becuase I downloaded the model and opened up. But I couldn't see where one would fit. I'm trying the build the Cherudim, and I though I would try to make it fit a fig, but I can't do it without affecting the design I'm trying to make. SO I figured your gundams did, and you managed to make it look good but, but it seems as though it doesn't so I've given up on the fig thing.
As I stated in the features for this model, it fits a minifig in the chest. The upper chest is hollow, and the white part on the upper chest is the cockpit hatch. There isn't a cockpit with controls exactly (I didn't add them because no one would see them), but a minifig does indeed fit. The white part is on a pivot that allows it to open and close.
 I like it 
  October 22, 2011
question: does this fit a fig? becuase I downloaded the model and opened up. But I couldn't see where one would fit. I'm trying the build the Cherudim, and I though I would try to make it fit a fig, but I can't do it without affecting the design I'm trying to make. SO I figured your gundams did, and you managed to make it look good but, but it seems as though it doesn't so I've given up on the fig thing.
 I made it 
  October 10, 2011
Quoting leon lara exia...:(
I've never liked Exia's design, really. The 00 Qan[T] is a much nicer version of Exia's design in my opinion. So, I'll never be building Exia for that reason. I'm pretty much done with Gundam 00 for now.
 I like it 
  October 1, 2011
exia...:(
 I like it 
  July 17, 2011
i tryed to download the instructions but wen i opend the file and the file named image100.lmxl didnt work wat do i do to get to work
 I like it 
  July 8, 2011
Another great one.
 I made it 
  June 27, 2011
Quoting leon lara i have just recently built the torso for the 00, love the mechinism in the cockpit!
Really? Cool! The mechanism on the cockpit was meant to be a place holder for something much cooler, but LDD is stupid and won't let me do things in the program that I KNOW are possible in real life models. I'm glad that you like it, though. Let me know if there are any major design flaws that I need to know about when you are done.
  June 26, 2011
i have just recently built the torso for the 00, love the mechinism in the cockpit!
 I like it 
  June 26, 2011
One word describes this MOC, "AWESOME!!!" :D
 I like it 
  June 25, 2011
Really a perfect gundam MOC!!! I like it more than the original bandai gunpla
 I made it 
  June 25, 2011
Quoting leon lara i frogot to ask you, are you gonna build the full saber of the 00 Quan[T]?
You did ask, but yes, I want to. I don't know if I WILL, but I want to--much will depend on how things go with the 00 Raiser--as their design principles are similar.
 I like it 
  June 25, 2011
i frogot to ask you, are you gonna build the full saber of the 00 Quan[T]?
 I like it 
  June 25, 2011
sweet!
 I made it 
  June 25, 2011
00 Seven Swords is nearly finished--I'm just modifying the GN Sword IIs, and then its finished. After that it will be on to the 00 Seven Sword/G and /G Inspection. Finally, after that it will be time for the dreaded 00 Raiser and XN Raiser!
 I made it 
  June 24, 2011
Quoting leon lara is this the 1/100 or 1/144 scale?
This would be more of 1/60 scale to be sure. Its quite tall.
 I like it 
  June 24, 2011
is this the 1/100 or 1/144 scale?
 I made it 
  June 24, 2011
Quoting evangelionfanx xd I've decided to make saviour gundam in both flight mode and mech mode then incorporate a transformation. It'll probably be made over the course of this week along with maybe a model of dynames. Also when you make the shoulder pieces using your frame what piece do you use to go into the pegs?
Glad to hear it--MOCpages needs more Gundams. I use a 1x1x2 technic brick with hole for the shoulder pieces. Feel free to download the instructions and take it apart to see for yourself. Thats the easiest way to find out.
 I like it 
  June 24, 2011
I've decided to make saviour gundam in both flight mode and mech mode then incorporate a transformation. It'll probably be made over the course of this week along with maybe a model of dynames. Also when you make the shoulder pieces using your frame what piece do you use to go into the pegs?
 I made it 
  June 24, 2011
Quoting leon lara could you build the gn sword III?
Its going to have every upgrade every conceived of for this one. But they will be in a separate posting. This is one is just for the 00 Gundam itself.
 I like it 
  June 23, 2011
could you build the gn sword III?
 I like it 
  June 23, 2011
oh my god that is epic dude! i might even try to build it!
 I made it 
  June 23, 2011
Quoting ccy 8086 Hey, I saw you change the design for the horn on the head, it's very impressive!!!
Thomas re-designed it for me. He's got a head for heads, what can I say?
 I like it 
  June 23, 2011
Hey, I saw you change the design for the horn on the head, it's very impressive!!!
 I like it 
  June 23, 2011
haha sweet! Looks more badass now! I'm glad it helped you.
 I made it 
  June 23, 2011
Quoting Thomas Z. If you'd like, I could try to make a better head for you. Altough you might feel like "it's not mine", you can still learn from it. But I must admit, it's pretty hard to make smaller heads with accuracy.
I actually have no problem with collaborations. Many of my existing MOCs were collaborative attempts with my good friend Solus Maximus. If you get better results, then why not? And I definitely got better results from your help--thanks a mil!
 I made it 
  June 23, 2011
Quoting Thomas Z. Hmm, I actually went and tried to modify your head design, and I think I found a new way for V fins (man I learned something new today):D, I think I'll upload it while giving massive credits for you, also while I was at it I made an Exia head variant too. Check it out later, I think you'll love it!
You thought right! I'll be uploading pics with the improved head later! Kudos!
  June 23, 2011
Hmm, I actually went and tried to modify your head design, and I think I found a new way for V fins (man I learned something new today):D, I think I'll upload it while giving massive credits for you, also while I was at it I made an Exia head variant too. Check it out later, I think you'll love it!
  June 23, 2011
If you'd like, I could try to make a better head for you. Altough you might feel like "it's not mine", you can still learn from it. But I must admit, it's pretty hard to make smaller heads with accuracy.
 I made it 
  June 23, 2011
Quoting Thomas Z. The weapons are spot on! But I just noticed that the "ear" extensions(don't know what else I should call them) are missing from the head. http://farm6.static.flickr.com/5243/5284968886_984b33a8ae.jpg Everything else is fine!
I'm afraid I just don't have your head-building skills. LDD is a real pain for me to use when it comes to intricate little work like heads. I'll settle for at close likeness at this point.
 I like it 
  June 23, 2011
The weapons are spot on! But I just noticed that the "ear" extensions(don't know what else I should call them) are missing from the head. http://farm6.static.flickr.com/5243/5284968886_984b33a8ae.jpg Everything else is fine!
 I made it 
  June 23, 2011
Okay, well that about wraps this one up then. I think I'm going to do the 00 Gundam Seven Swords upgrade next, rather than the 00 Raiser. I want to make sure that I get the 00 Raiser right, so I need some other stuff to practice on first.
 I made it 
  June 23, 2011
Quoting Shadowa Heartfelt The leg green thing is too big. All of them should be the same size. I'm glad to see you made the GN beam rifle/sword correct. One question, can the GN drives move to the front and to the back like they do with the actual model and in the show?
Just so you know, the GN Condensers (the green things) on the legs are significantly bigger on the legs. Lego, unfortunately is short on size options for round things. The ones on the legs only look smaller because they have various other parts protruding into them. I struggled to achieve that effect but couldn't get it right, so I left it off. In any case, the GN drives do indeed pivot to the front and back of the unit without trouble. I will demonstrate that in my next set of pics that I post.
 I like it 
  June 23, 2011
Excellent work, as usual!
 I like it 
  June 22, 2011
The leg green thing is too big. All of them should be the same size. I'm glad to see you made the GN beam rifle/sword correct. One question, can the GN drives move to the front and to the back like they do with the actual model and in the show?
 I made it 
  June 22, 2011
Quoting ccy 8086 I'm glad to see it finish and it's really impressive!! Since you are going to post some pose, would you mind to show us how the cockpit open, the driver arm move and the leg move? I'm really interested in it.
I've got some poses that show the legs moving for the moment. I'll work on some good swing arm shots and cockpit work afterwards.
 I like it 
  June 22, 2011
I'm glad to see it finish and it's really impressive!! Since you are going to post some pose, would you mind to show us how the cockpit open, the driver arm move and the leg move? I'm really interested in it.
 I made it 
  June 22, 2011
Quoting evangelionfanx xd So you finally finished it? Great job I own the kit and I have to say this is very moderately accurate. Kudos to you :D >Berserker<
Well, the shoulder shields are kind of meh, but I'm happy with everything else. The shoulder shields are not used really anymore after the 00 Seven Swords Upgrade, so its not really an issue. They were really just to test the mounts for the GN Buster Sword and the 0 Raiser.
 I like it 
  June 22, 2011
So you finally finished it? Great job I own the kit and I have to say this is very moderately accurate. Kudos to you :D >Berserker<
 I like it 
  June 22, 2011
So you finally finished it? Great job I own the kit and I have to say this is very moderately accurate. Kudos to you :D >Berserker<
 I made it 
  June 22, 2011
So, I'm all done with the main 00 Gundam. It has all the accessories now, including the shield/blade things and the beam sabres. I'll be moving on to the 0 Raiser next. But I'll be posting pics of the 00 here as opposed to making a whole new post for it. The 0 Raiser and 00 Raiser and 00 Gundam Variants will each get their own page though.
 I like it 
  June 22, 2011
I should have check this sooner... I'm not particularly fond of 00 gundams design but that doesn't matter. Only the amazing level of accuracy counts here. It's really exellent, as always. I wish I have your skills...
 I like it 
  June 21, 2011
This is excellent as is the fact that your not finished with it is a jaw dropper. Excellent work. I can't wait to see the finished project.
 I like it 
  June 21, 2011
Yes I'm aware, but megablocks did it, and frankly pretty much no one has it, and it's poorly assembled. The zaku however, dosen't look half bad.
 I made it 
  June 21, 2011
Quoting Marcus Jackson Off to a great start I see. On the subject of lego creating a gundam theme... It would be a mixed blessing because yes you could have gundam parts which are hard to make, but it would also make previous techniques obsolete, like if they made a head with parts that were specifically designed for it, then... I don't know, I'd feel like a lot of hard work would be done for nothing if everyone in the world could just buy exactly the thing I was trying so hard to build.
They've already done it. The only reason you don't see them around much is because they aren't available in stores in the US and Europe, only Asia, and they are expensive.
 I made it 
  June 21, 2011
Quoting Jesse Long I got to second the idea that Evangelion gave on your MOC page. A LEGO Gundam theme would be a HUGE cash cow for The LEGO Group, as long as The LEGO Group gives it as much attention as it does to the LEGO Star Wars theme, by that I mean, The LEGO Group would allow for all of the pilots and Gundam mecha and other Gundam vehicles to be made in LEGO form. If The LEGO Group can mix in things like this, Tengaa Toppaa Gurren Lagaan, and Exo-Squad and make Exo-Force and it become a surprise underground hit for LEGO and if the LEGO Creator series also includes really good parts for mecha, if not bodies for outright mecha, then why not make an actual LEGO Gundam theme? It only makes perfect sense, and especially with people like you, Thomas Z., Dali Zheng, Phong Chang, m_o_n_k_e_y, and a few other people that are really good (and, consequentially on my My Favorite Builders List) with making mecha, it makes only even more sense to make this into an actual LEGO Design by Me custom set and then discuss this with some other MOC Pages memebers that are actual LEGO Master Builders or LEGO Employees and then to get the rights from the various people that make the anime, manga, and video game franchises of Gundam and to use that Google translation thingy to write e-mail messages to the people that are in charge of the copyright issues (and, hopfully, a lot of yen to pay for said copyrights to make it in LEGO form, too). this would not only be a huge LEGO theme here and in the EU but it would also be a mega huge thing in Japan and worldwide were it to become a reality.
Again, I say thanks for the support, and for the ideas on how to get the ball rolling on this, but I think that you guys are forgetting one crucial thing: Mega Bloks has already made gundam lego. I think that Bandai and them already have an arrangement, meaning that Lego will never have a gundam line, any more than it will ever have a halo line. Its unfortunate, but thats how it is. http://www.hlj.com/scripts/hljlist?rel=redirect&Dis=-2&ei=1308674396
 I like it 
  June 21, 2011
Off to a great start I see. On the subject of lego creating a gundam theme... It would be a mixed blessing because yes you could have gundam parts which are hard to make, but it would also make previous techniques obsolete, like if they made a head with parts that were specifically designed for it, then... I don't know, I'd feel like a lot of hard work would be done for nothing if everyone in the world could just buy exactly the thing I was trying so hard to build.
  June 21, 2011
I got to second the idea that Evangelion gave on your MOC page. A LEGO Gundam theme would be a HUGE cash cow for The LEGO Group, as long as The LEGO Group gives it as much attention as it does to the LEGO Star Wars theme, by that I mean, The LEGO Group would allow for all of the pilots and Gundam mecha and other Gundam vehicles to be made in LEGO form. If The LEGO Group can mix in things like this, Tengaa Toppaa Gurren Lagaan, and Exo-Squad and make Exo-Force and it become a surprise underground hit for LEGO and if the LEGO Creator series also includes really good parts for mecha, if not bodies for outright mecha, then why not make an actual LEGO Gundam theme? It only makes perfect sense, and especially with people like you, Thomas Z., Dali Zheng, Phong Chang, m_o_n_k_e_y, and a few other people that are really good (and, consequentially on my My Favorite Builders List) with making mecha, it makes only even more sense to make this into an actual LEGO Design by Me custom set and then discuss this with some other MOC Pages memebers that are actual LEGO Master Builders or LEGO Employees and then to get the rights from the various people that make the anime, manga, and video game franchises of Gundam and to use that Google translation thingy to write e-mail messages to the people that are in charge of the copyright issues (and, hopfully, a lot of yen to pay for said copyrights to make it in LEGO form, too). this would not only be a huge LEGO theme here and in the EU but it would also be a mega huge thing in Japan and worldwide were it to become a reality.
 I made it 
  June 21, 2011
Quoting Thomas Z. hmm, you didn't change the horns? Still looking great tough!
I did though! I used the screwdrivers for the white ones. I kept the gold ones as-is because the lightsaber rods made it look like ultra magnus from transformers.
  June 21, 2011
hmm, you didn't change the horns? Still looking great tough!
Mithryl Altaire
 I like it 
Adrian Alamar
  June 20, 2011
WHOA !!!! THIS IS EPIC .. you gonna make the 0 raiser too ?
 I made it 
  June 20, 2011
Quoting Doc. Jared . Wow, I can't wait to try it out then. Will you be making a double 0 raiser? That would be sweet...
I will definitely be making the 00 Raiser, or trying to anyways--The challenge will be in making an 0 Raiser that is to scale with the gundam while still being capable of transforming, AND fitting a minifig inside (because it just isn't one of my builds unless it fits a minifig). The minifig will have to lie down inside, most likely (or I'll use the little kid legs-hahahaha).
 I made it 
  June 20, 2011
Quoting Adrian Alamar WHOA !!!! THIS IS EPIC .. you gonna make the 0 raiser too ?
I'm making all the upgrades for the 00 Gundam, and that includes the 0 raiser and 00 Raiser
 I like it 
  June 20, 2011
Wow, I can't wait to try it out then. Will you be making a double 0 raiser? That would be sweet...
 I like it 
  June 20, 2011
Looking pretty good. Looks accurate to me, though I'm not as big a Gundam fan. I look foreward to seeing this one completed. ^Blub^
 I like it 
  June 20, 2011
Cool also I'm thinking about making Saviour Gundam but I don't know how to start. I'm kinda thinking of making it transformable. I'd have to make my own frame for that but tips would be nice ^_^
 I made it 
  June 20, 2011
Quoting evangelionfanx xd Have you ever thought of sending these to the Lego Corp? Or the guys who make the model kits? You could make serious money off these look into it.
Thanks for the vote of confidence, man. No I hadn't thought of it before. Although--this model kit just by itself is over 1000 pieces. I doubt it would be economical to try and make kit for sale with that kind of piece count. Of course, with all the weapons and everything, the piece count skyrockets pretty rapidly. But thanks for the idea. I'll release the instructions once it is done and people can try it out for themselves.
 I like it 
  June 20, 2011
Have you ever thought of sending these to the Lego Corp? Or the guys who make the model kits? You could make serious money off these look into it.
 I like it 
  June 20, 2011
Very good. I love Gundam, and 00 is one of my favorite series. There are only two things I think you could do a bit better on. One is the head and the other is the feet. If you could do a bit better with those two, it'd be amazing.
 I like it 
  June 20, 2011
NIIIIICE! This is looking great and I can't wait to see it finished! I think you should try your hand at the Gundam from Unicorn some time:)
 I like it 
  June 20, 2011
So your tackling Double O Eh? Thinking about trying with Harute my self.
 I like it 
  June 20, 2011
Wow! Even if this was the final product, it would still be amazing.
 I made it 
  June 20, 2011
Quoting Thomas Z. The white ones are good as they are, try using sticks for the golden horns, the long stick for an umbrella, that should be long enough.
Thanks! Will do! I'll post some pics later.
  June 20, 2011
The white ones are good as they are, try using sticks for the golden horns, the long stick for an umbrella, that should be long enough.
 I made it 
  June 20, 2011
Quoting Thomas Z. It's coming along really nicely. A little advise tough, I think you should change the golden horns on the head for a longer piece and make the white ones shorter, on the original model the gold one is longer then the white horns. http://farm3.static.flickr.com/2509/3854588655_de6b16857e_o.jpg And also, I think that the white 1x2 plate holder and stick is not needed on the lower legs. But despite these things as a model of 00 Gundam it's really impressive and accurate. Can't wait for the finished product!
I'll fiddle with the v-fins, though I don't know what other piece to use in place of the ones I am already using. As for the legs, they are pretty much finalized. I'm not sure what holder and stick you are referring to, but if you mean the flaps at the bottoms of the legs, they give some much needed shape to the legs. Without them, it becomes painfully obvious that it is just a block at the end of the legs.
 I like it 
  June 20, 2011
It's coming along really nicely. A little advise tough, I think you should change the golden horns on the head for a longer piece and make the white ones shorter, on the original model the gold one is longer then the white horns. http://farm3.static.flickr.com/2509/3854588655_de6b16857e_o.jpg And also, I think that the white 1x2 plate holder and stick is not needed on the lower legs. But despite these things as a model of 00 Gundam it's really impressive and accurate. Can't wait for the finished product!
 
By Mithryl Altaire
Add to my favorite builders

43
people like this. See who.

7,346 visitors
68 comments
Added June 20, 2011
 


LEGO models my own creation MOCpages toys shop GN-0000 00 Gundam and VariantsMecha


You Your home page | LEGO creations | Favorite builders
Activity Activity | Comments | Creations
Explore Explore | Recent | Groups
MOCpages is an unofficial, fan-created website. LEGO® and the brick configuration are property of The LEGO Group, which does not sponsor, own, or endorse this site.
©2002-2014 Sean Kenney Design Inc | Privacy policy | Terms of use