MOCpages : Share your LEGO® creations
LEGO models my own creation MOCpages toys shop MINI AUG-A3 rbgWeapons
Welcome to the world's greatest LEGO fan community!
Explore cool creations, share your own, and have lots of fun together.  ~  It's all free!
MINI AUG-A3 rbg
>>>>>THIS IS WHEN I UPLOADED THE GUN BEFORE.(OMFG. I already typed and uploaded these pictures(about 40) and wrote captions for all of them. When I was finished, I clicked on continue but all of a sudden, Mocpages wants me to put in my e-mail and password! WTF. I was already logged in! so, I put in my password and Email.....then all of the pictures and captions were all gone. Mocpages needs to fix this s**t for reals, also I am really pissed right now and dont want to do captions all over again.)<<<<< This is the gun that I have been planning to build for a month now. It took a good 3 hours to build and was very difficult. I hope you enjoy it.
About this creation


Left side of the gun with EOTECH sight and unfolded front grip.



The AUG-A3 without the EOTECH sight and folded front grip.



Right side of the gun. You can see the ejection port thing, which is the only feature on the reight side.



The magazine is a shorter version of my AK mag and I didnt make a mag release for it.



Close up on the trigger and trigger guard. I might have to fix the angle of the trigger guard because its not slanted enough like the real gun.



The next two pics are close ups on the front grip.





The Rear half of the gun. Most of the good stuff is in here.



The Front half of the AUG-A3 has the rail, bolt, and grips.



The new EOTECH sight with a red dot. I have to make a new version because its sloppy.



The Bolt's function is the same as pulling the trigger like all my other guns. This is when the bolt is relaxed.



The bolt pulled back. It doesnt go all the way back like the real gun, im working on it though.



Close up on the top rail. There are a few versions of the AUG-A3, my gun is the one with only a top rail and short barrel. Other ones have side rails, which makes the gun longer.



Looking down the sights. I dont think the AUG-A3 has iron sights, but I added them because there was no way to aim, and as you know, all my guns are very accurate at shooting.



FPS view with no EOTECH. (not really aiming at anything)





note (This part of the stock was taken off tho show the mechanism of the gun.)



The ENTIRE mechanism which includes the "clock work", bolt, and trigger.



The "Clock work" took me a good 90 minutes to make. Most of this time was spent on creating previous versions that failed. Other guns you can just make the mech then build the gun around it, but this gun, because of its unusual configuration, was difficult to make.



The trigger relaxed, note that the "2m" axle connected to the "L" piece is preventing the "saw" piece from spinning.



When the trigger is pulled, the "L" piece spins a tiny bit and the "saw" piece is only allowed to move one spike because another "2m" piece moves up to block it.



The bolt unstressed. As you can see, the bolt has an area of 2x2 plate sticking out. When pulled back, that 2x2 plating fits exactly over the "L with arch" piece and pushes the "3x1 technic" piece.



When the bolt is stressed, the upper part of the "3x1 technic" piece is pushed, and the bottom part pulls on bar that is connected to the "L" piece.



The trigger... you'll see how it works soon.



It fits directly into this small crevace that was made for it...



The "clock work", the result of 90 painful minutes and 5 failing attempts.



This wall has 4 holes that the mechanism is stuck to. the other 4 have "6x1 tiles" that are attached on the outside.



The trigger next to the actual trigger.



My Mini AUG-A3 has a special, larger, bolt. The following are pics of how it was made.













The gun can easily be stripped into these three parts.(not including the EOTECH and magazine.)



Close up on the flipable front iron sight. There should be a ring there for attaching a sling, but i dont really need one.



Final look at the Mini AUG-A3 rbg. I LOVE THIS GUN!! so, it might be a while before i get over it and destroy it to make another.



The next weapon. Of course it will be in mini.

thanks for looking.
please vote and comment!!

THE NEXT GUN (MGL GRENADE LAUNCHER) WILL BE DELAYED. IT IS GOING TO COME OUT NEAR BEGINNING OF NEXT YEAR(2012). PLEASE UNDERSTAND THAT IT IS A VERY LARGE COMPLICATED GUN AND I WILL NEED A LOT OF TIME. THANK YOU.

>>>>>THIS IS WHEN I UPLOADED THE GUN BEFORE.(This is the next gun to come. well, its not really a gun. SRY about the NO CAPTIONS, ill try to get them up after I meditate and try to control my anger(not really).
I hope you enjoyed the pics and...
MOCPAGES NEEDS TO FIX ITS S**T UP!!!<<<<<



Comments

 I made it 
  June 30, 2011
Quoting alan berenshteyn im guessing mgl grenade launcher and is it gonna fire cuz i wanna see how you'd pull it off also your other guns are awsome.
Yeah its gonna fire, but im still working on the mechanism.(i think i got it). Thanks!
 I like it 
  June 30, 2011
im guessing mgl grenade launcher and is it gonna fire cuz i wanna see how you'd pull it off also your other guns are awsome.
 I like it 
  June 28, 2011
Good job, can't wait to see your new gun!
 
By RBG-ARMORY .
Add to my favorite builders

2
people like this. See who.

1,388 visitors
3 comments
Added June 24, 2011
More from RBG-ARMORY
More across MOCpages
 


LEGO models my own creation MOCpages toys shop MINI AUG-A3 rbgWeapons


You Your home page | LEGO creations | Favorite builders
Activity Activity | Comments | Creations
Explore Explore | Recent | Groups
MOCpages is an unofficial, fan-created website. LEGO® and the brick configuration are property of The LEGO Group, which does not sponsor, own, or endorse this site.
©2002-2014 Sean Kenney Design Inc | Privacy policy | Terms of use