Model number: RX-178
Code name: Gundam Mark II
Unit type: prototype general purpose mobile suit
Manufacturer: Earth Federation Forces (Titans)
Operator(s): AEUG (Anti-Earth Union Group); Titans
First deployment: December UC 0086
Accommodation: pilot only, in panoramic monitor/linear seat cockpit in torso
Dimensions: overall height 19.6 meters; head height 18.5 meters
Weight: empty 33.4 metric tons; max gross 54.1 metric tons; mass ratio 1.44
Armor materials: titanium alloy/ceramic composite
Powerplant: Minovsky type ultracompact fusion reactor, output rated at 1930 kW
Propulsion: rocket thrusters: 4 x 20300 kg; vernier thrusters/apogee motors: 10
Performance: maximum thruster acceleration 1.50 G
Equipment and design features: sensors, range 11300 meters
Fixed armaments: 2 x XB-G-1048L (Titans) / A*E-Br*G-Sc-L (AEUG) beam saber, power rated at 0.45 MW, stored in recharge racks on backpack, hand-carried in use
Optional fixed armaments: VCU-505EX-Gry/Ver.009 (Titans) / VCU-505EX-V*B/Ver.012 (AEUG) 60mm 2-barrel vulcan pod, 1400 rounds total, mounted on head; RX*M-Sh-VT/S-00018 (Titans) / RX*M-Sh-VT/S-001 (AEUG) shield, mounted on either forearm
Optional hand armaments: BOWA*XBR-M-86-C2 (Titans) / A*E-Br*XBR-87-C (AEUG) beam rifle, power rated at 2.6 MW, powered by replaceable e-pac, 2 spare e-pacs stored in shield; H-Baz-85-Gry/Ver.045 (Titans) / H-Baz-87-A*E/Ver.004 (AEUG) 360mm hyper bazooka, clip-fed, 7 rounds per clip plus 1 round in chamber, can be stored on rear skirt armor storage rack; AE/ZIM.C-BAZ-531 clay bazooka, clip-fed, 7 rounds per clip plus 1 round in chamber, can be stored on rear skirt armor storage rack.
Quoting Mithryl Dlarix
Nice work on this--definitely one of the nicer attempts at the mk II that I have seen around. I also see that you are working with the posing now--its pretty hard, no? Keep up the great work!
Yeah it's pretty tough. By the way, you know the frame you used for the original strike and freedom gundams? Do you think it would work well for the aegis? Because I mixed that and the LDD frame you used on your heavyarms and your other gundams.
It's cool, we could see nice work on this one!
You caught a lot of details. If I could permit myself, in order to improve it a bit, try to include completly the arm/torso joint to the torso. But it's a very cool model, and you did a better job at posing it than me with my Destiny x).Keep up the good building!