MOCpages : Share your LEGO® creations
LEGO models my own creation MOCpages toys shop Trident Assault Craft (Lego Version) FinishedStar Wars
Welcome to the world's greatest LEGO fan community!
Explore cool creations, share your own, and have lots of fun together.  ~  It's all free!
Trident Assault Craft (Lego Version) Finished
Finally, I present to you my Trident Assault Craft. It is my first project that I designed in LDD, and then made with real Lego! I know I've said this already, but in case you didn't know it can stand on its own, the legs are posable, and the drill can spin. It has a few changes to the original design, including color changes (due to unavailability on Bricklink or price), as well as some minor piece changes. I strengthened the internal structure within the Trident Assault Craft's head, and I changed the length of the drill. Now that I've built it in real Lego, I want to make it an actual Lego set. I know that when many people saw this in the Star Wars the Clone Wars TV show, they thought that Lego was going to make one of these. But there's been no news that they are. So go to this link: http://lego.cuusoo.com/ideas/view/8192, and support my project. This website is operated by Lego to help get fan based ideas for actual Lego products. When I've reached 10,000 supporters the design will be sent to the Lego group for consideration. While you're there be sure to check out other creations!
About this creation
You can support this project by clicking here: Lego Cuusoo













This is the drill, which does spin.

This is looking up at the point of the drill, I couldn't make it a perfect tip, but I think it looks fine.






I wanted to make make the macaroni pieces brown instead of dark grey, but they were way too expensive for the amount I needed.

These are all four of the plates that I used for the head.



Here is a view of the head's internal structure. I used hinge plates to attached the plates on the outside of the head, and these hinge plates were attached to a series of grey plates, which were connected to the head at two places.

I used a ton of hinges on the inside of the head!









This is where all of the "windows" are. They are supposed to be yellow, but there weren't any 4x4 dome like pieces in trans-yellow, so I got the next closest thing: trans-neon green.



Thanks for viewing! Be sure to rate and comment.




Comments

 I like it 
  October 29, 2012
this should be an actual set
 I like it 
  September 25, 2012
Better than what people have posted on Cuusoo.
 I like it 
  September 1, 2012
Very nice work, very nice.
 I made it 
  August 6, 2012
Quoting Tim C What a unique craft. I like the trans-green pieces that you threw in there. The shaping gives it a strong alien look. Makes me think of something from War of the Worlds.
It is a very unique looking craft, and has one of the coolest shapes from the Clone Wars series. To me, it resembles a "boxier" version of a squid haha. Thanks for your comment.
 I like it 
  August 5, 2012
What a unique craft. I like the trans-green pieces that you threw in there. The shaping gives it a strong alien look. Makes me think of something from War of the Worlds.
 I made it 
  August 5, 2012
Quoting Mastermind º Beautiful work! I like the unique shape!
Thanks!
 I like it 
  August 5, 2012
Beautiful work! I like the unique shape!
 I like it 
  February 29, 2012
this is awesome! definitely the best on mocpages!
 I like it 
  February 26, 2012
Totally awesome dude!! I hope they do make it into a set I would make sure I got it!
 I made it 
  February 13, 2012
Quoting Dan Wilkinson OK, i already said this on your Part 1 version but now its finished. . . this is really EXCELLENT! . . . i'm in the process of building one of these - gonna 'try' and do an interior too - although its nowhere near complete yet. its good to see more high quality Separatist stuff appearing on MOC pages - well done!
Thanks! I cant wait to see yours!
 I like it 
  February 1, 2012
Beautiful, as I thought it would be.
 I like it 
  January 25, 2012
OK, i already said this on your Part 1 version but now its finished. . . this is really EXCELLENT! . . . i'm in the process of building one of these - gonna 'try' and do an interior too - although its nowhere near complete yet. its good to see more high quality Separatist stuff appearing on MOC pages - well done!
 I like it 
  January 24, 2012
This is flippin' fantastic! Absolutely sweet!
 I made it 
  January 23, 2012
Quoting Space Gypsy . Very good. You should make one of those space things that drill into ships fro TCW. I can't remember what their called though. :P
They're called droch-class boarding ships. And thanks for the idea!
 I like it 
  January 22, 2012
Excellent work- very accurate. TLG should make this craft as a set. Only if you could've been able to add interior there also (exterior is nearly perfect) but it is of course hard because of those supports there- anyway good job!
 I like it 
  January 22, 2012
Very good. You should make one of those space things that drill into ships fro TCW. I can't remember what their called though. :P
 I like it 
  January 22, 2012
has to be made a lego set well done!
Connor Lucero
< AM3RICA >
  January 21, 2012
Simply amazing! It looks so real. I hope it gets 10,000 supporters.
 I like it 
  January 21, 2012
Excellent job and thanks for the tutorial
 I like it 
  January 21, 2012
WOAH!! This is so accurate for the real one. Great work.
 I like it 
  January 21, 2012
Awesome! I saw these on SWCW and they became one my favorite SW ships! Nice job!
 I like it 
  January 21, 2012
Awesome work, I really like how you incorporated the eye!
 I like it 
  January 21, 2012
Impressive!
 I like it 
  January 21, 2012
This is awesome! I love the clone wars. Although I must say, I think the Clone Wars crew had been watching Code Lyoko. This thing's design and abilities greatly resemble one of the monsters from season 4. When I first saw this thing in that episode where the seperatists attempted to take over the clone's home planet. (name escaped me while typing this) anyway, awesome job on this! Here's that monster that I think this thing drew inspiration from: http://codelyoko.wikia.com/wiki/Kalamar similarities: Similar shape, moves like a squid, they both have a drill on the underside of their "main" sections. Even the placement of the "Window" is very close to the Eye of Xana on this thing.
 I like it 
  January 21, 2012
Nice work!
 
By Connor Lucero
Add to my favorite builders

34
people like this. See who.

4,883 visitors
25 comments
Added January 21, 2012
More from Connor
More across MOCpages
Droid Control Ship  You are at the end of this group.
 


LEGO models my own creation MOCpages toys shop Trident Assault Craft (Lego Version) FinishedStar Wars


You Your home page | LEGO creations | Favorite builders
Activity Activity | Comments | Creations
Explore Explore | Recent | Groups
MOCpages is an unofficial, fan-created website. LEGO® and the brick configuration are property of The LEGO Group, which does not sponsor, own, or endorse this site.
©2002-2014 Sean Kenney Design Inc | Privacy policy | Terms of use