MOCpages : Share your LEGO® creations
LEGO models my own creation MOCpages toys shop Barret M82A1 .50 Cal. Sniper Rifle (working)
Welcome to the world's greatest LEGO fan community!
Explore cool creations, share your own, and have lots of fun together.  ~  It's all free!
Barret M82A1 .50 Cal. Sniper Rifle (working)
This is my working replica of the Barrett M82A1 sniper rifle. Credit goes to Jack Streat for the mechanism.
About this creation

The gun, no magazine.

The magazine, it can hold 7-8 bullets.

The magazine, other side.

The scope attached to the gun.

The scope, unattached.

You can look through the scope!

The RIS (please tell me if RIS is the wrong name for this)

The barrel (I know it's a bit short, but I ran out of pieces).

The bipod, folded up.

The bipod, unfolded (ready to be used).

The magazine well (where you place the magazine, duh)

The stock.

A close-up from the stock.

The sniper, standing on the bipod, it didn't fit on my desk where I usually take my pictures.

The muzzle break.

The trigger and grip.



MECHANISM:

The magazine in the gun.

The handle pulled back...

and pulled forward again (the bullet is ready to be fired).

A close-up from the 'bullet loader'.

Picture from the barrel inside the gun.

A last look at the Barrett.
For instructions: rate and comment, and post in your comment your email address and if you want a complimet ;-)
That's it!
Please rate and comment!!!



Comments

 I like it 
  March 15, 2014
Can I plz have the instrructions for this. Ben.gray318@schools.sa.edu.au
 I like it 
  February 4, 2014
hey nice weapon you build ;) would like to have the instructions if you could send it to my email: perrycox44@gmail.com thanks a lot
 I like it 
  February 2, 2014
That's awesome man!! Im only new on here and would love the challenge of building something like this!! Do you happen to have parts lists and instructions you could email to mattburrell1987@hotmail.com Thanks man!! and great job too!!!!!
 I like it 
  January 12, 2014
Wow that is my favorite gun and you have rendered it in the best way. Please send the instructions to grantsnydes@gmail.com. Thank you!
  December 1, 2013
wow... your new one is just soooo much better ;P
 I like it 
  November 24, 2013
Lololololololol my email is nnamlus@gmail.com
 I like it 
  October 13, 2013
Amazing! Send to qweeqkk@gmail.com Please!
 I like it 
  October 13, 2013
Awesome gun. Please send to beastiegene@hotmail.com
 I like it 
  October 13, 2013
hello, really cool rifle! can u pls send me the building instructions? marcoschulze2@gmx.de thanks
 I like it 
  October 2, 2013
Really Cool£” instructions please£”£”£”send it here out-metal-man@hotmail.com .....many thanks£”
 I like it 
  August 28, 2013
Could you please seand me the instructions for the barret ? thx already =) looloolooloool@gmail.com
  July 25, 2013
You are a god among men. I will eternally worship you If you send me the instructions my email is jordansemjaniv@netspace.net.au And have you ever thought about making the intervention or a pistol?
 I like it 
  April 29, 2013
Wow, just awsome, these are art works. I'll comment and rate all of them but could you send instructions for the M82A1, G36 and L96A1 as well as the FN F2000? gti_16@hotmail.com
 I like it 
  March 29, 2013
i like this gun! can u send the instruction to wongdaniel297@yahoo.com
 I like it 
  March 29, 2013
i like this gun! can u send the instruction to wongdaniel297@yahoo.com
  March 17, 2013
cool! that is one of my favourite snipers. can you please send instructions to joca.dj@hotmail.com for this an your fn2000? and could you make an xm8 with instructions as your next gun? btw i addrd you as fav builder, check out my guns?
 I like it 
  December 15, 2012
Best looking working replica of this gun. Barret .50 cal. sniper rifle is my favorite sniper rifle ever and i like to try build one. My email is mikkowinsten93@gmail.com. Can you also sent me instructions of FAMAS. I like to trye build it also.
 I made it 
  October 4, 2012
Quoting Alex Whocares Realy enyoied this gun. The power and aiming was great. But now for some problems and i dont know how to explain it but have get raports on a bug on the charging rod?
I'm thanks it worked well, could you please email me with a discription (and maybe some photos) of your problem to build.instr.timo@gmail.com
 I like it 
  October 3, 2012
Realy enyoied this gun. The power and aiming was great. But now for some problems and i dont know how to explain it but have get raports on a bug on the charging rod?
 I like it 
  August 29, 2012
Very awesome weapon! Please send the instructions to: fabian.naier@bluewin.ch Thx
 I like it 
  August 16, 2012
Wow. That is AWESOME! Bobby.moss@comcast.net
  July 29, 2012
nice gun. Can you send the instruction plz My email is nonamenofear2009@hotmail.com
 I like it 
  July 29, 2012
callange: try make a closed-bolt version :)
 I like it 
  July 9, 2012
Extremely sick! tmac.hardy@gmail.com is my email if I could get your instructions. Thanks!
 I like it 
  June 24, 2012
Blake.mreverything.carpenter@gmail.com
 I like it 
  June 9, 2012
nice gun. Can you send the instruction plz My email is nonamenofear2009@hotmai.com
 I like it 
  May 21, 2012
Awesome Gun Please send instructions email: alexbialk@gmail.com
 I like it 
  May 10, 2012
Whoa! It been some time since i checked your creations out, and i have to say, you've gotten much better! Could you send instructions? elpa@hotmail.se
 I like it 
  April 28, 2012
can i please have instructions for this great gun jsenators@hotmail.com
 I like it 
  April 16, 2012
Pls send awesome jakesmythboots321@gmail.com Thanks
 I like it 
  April 14, 2012
hey man awsome gun. please send instructions to Bobby.moss@comcast.net. Thanks!
 I like it 
  April 14, 2012
OK :) Send another request to join the group and I will admit you in! :)
 I made it 
  April 14, 2012
Quoting Flare . If you're not planning on participating then don't join, there is no use having members in the group if they do nothing.
I promise I“ll be active!
  April 14, 2012
If you're not planning on participating then don't join, there is no use having members in the group if they do nothing.
 I made it 
  April 14, 2012
Quoting Flare . Hi, you were removed from the TFOL Private Club because of inactivity. If you would like to be active again in our group then please feel free to come back and re-join the group! Thanks, see you around! Link to the TFOLPC - http://www.mocpages.com/group.php/13672
Okay, I“m inactive because I“m addicted to a online game, and at the TFOLPC conversations are going quite fast, so it“s difficult for me to follow it...
 I like it 
  April 14, 2012
Hi, you were removed from the TFOL Private Club because of inactivity. If you would like to be active again in our group then please feel free to come back and re-join the group! Thanks, see you around! Link to the TFOLPC - http://www.mocpages.com/group.php/13672
 I like it 
  April 8, 2012
please send me to betschart.lukas@hotmail.com
 I like it 
  March 4, 2012
well done!
 I like it 
  February 27, 2012
Hey, this is by far one of the best guns I've seen on moc pages, probably the best sniper I've seen. It looks just like the real thing! It's great! Could you send me the instructions at psettle41@gmail.com ? Thanks!
 I like it 
  February 27, 2012
This is Amazing Could you send me the instructions. harveybk@hotmail.com Mainly for the Trigger mechanism as Jacks isnt clear enough ;)
 I like it 
  February 26, 2012
could i get the ldd for this please?
 I like it 
  February 21, 2012
i love this gun can you email me the instructions at scott.havernick@yahoo.com
 I made it 
  February 18, 2012
Quoting Thomas Graafland Awesome!!! I love it!!! Do you have video of the MOC in action? :-)
I have a youtube account, so I could make one, so if you wait just a week or so, you can go to my account and see it (http://www.youtube.com/user/WorkingLegoGuns) EDIT: I can't make a video, my camera is broken and I don't want to wait before it arrives.
 I like it 
  February 15, 2012
Wow.Big. 50 cal is beast! thats really good! well done!
 I made it 
  February 15, 2012
Quoting Cody Leaf Is there anyway you could help me build this or give me instructions?
Yes, reading the text I wrote in this moc!
 I like it 
  February 14, 2012
Is there anyway you could help me build this or give me instructions?
 I like it 
  February 14, 2012
Is there anyway you could help me build this or give me instructions?
Timo The Dutchman
 I like it 
Vladimir R.
  February 12, 2012
I think both RAS and RIS are correct. Anyway awesome rifle! What about M95? It is bullpup M82.
 I like it 
  February 12, 2012
I'm speach-less!
 I made it 
  February 12, 2012
Quoting Vladimir R. I think both RAS and RIS are correct. Anyway awesome rifle! What about M95? It is bullpup M82.
Maybe later on, I'm first going to build the G36 (and maybe complete family)
 I made it 
  February 12, 2012
Quoting Nikola Krstic i think its called RAS (rail attachment system)
Yes, that could be, I thought Rail Intergration System
 I like it 
  February 12, 2012
i think its called RAS (rail attachment system)
 I made it 
  February 12, 2012
Quoting europe lego gunz nice! but is the barrel not to short?
Yes it is, and I already said that, the barrel should be 737mm, but mine is about 200mm (but the short barrel version is about 218mm or so)
 I like it 
  February 12, 2012
 I like it 
  February 12, 2012
it's a very nice weapon
 I like it 
  February 12, 2012
nice! but is the barrel not to short?
 I like it 
  February 12, 2012
Awesome!!! I love it!!! Do you have video of the MOC in action? :-)
 
By Timo The Dutchman
Add to my favorite builders

53
people like this. See who.

3,334 visitors
57 comments
Added February 12, 2012
 


LEGO models my own creation MOCpages toys shop Barret M82A1 .50 Cal. Sniper Rifle (working)


You Your home page | LEGO creations | Favorite builders
Activity Activity | Comments | Creations
Explore Explore | Recent | Groups
MOCpages is an unofficial, fan-created website. LEGO® and the brick configuration are property of The LEGO Group, which does not sponsor, own, or endorse this site.
©2002-2014 Sean Kenney Design Inc | Privacy policy | Terms of use