The Heavy Duty Work Truck was developed with the expanding Series II project. It is intended to replace the original MarsCorp Work Truck that served so well for its years.
About this creation
4th wall: The truck part itself was based off the dump truck in the new LEGO® set; Loader and Tipper.
This is the new HD Work Truck seen by itself.
This is the back/bed. It has slide rails to allow easy accessory changes, simply remove that last caution painted plate nearest the vehicle's hitch.
The trailer seen on the truck in the opening pic. This trailer is simalar to the green trailer in the new LEGO® set; The Mine.
It does dump out.
The dump bed seen in the main image.
It slides to the back and tips to empty itself.
A flatbed attatchment with tailgate and winch.
It lowers in the same style of the dump bed.
An algae sprayer, used to lightly seed large areas quickly.
The following is a pinpoint drill, it is used to remove obstacles and for more precise drilling.
it can spin full 360, hinge out and then fold back up. It also utilizes the slide rails and can run from the front of the bed to the back very quickly.
This is a shovel arm, it works in the same way as the pinpoint drill.
This one can have multiple attatchments; a large drill, the shovel, and a hook block.
To weaponize the work truck, you add this quad Twenty Mike Mike (20mm) turret.
4th wall comentary: Those Mars Mission fans out there will recognize the piece on the pinpoint drill, as will some bionicle fans. The slide rails are a pain in the a** to work with on LDD. This was originaly developed as part of a group of vehicles to be posted later.