MOCpages : Share your LEGO® creations
LEGO models my own creation MOCpages toys shop AMA Plaza, Chicago
Welcome to the world's greatest LEGO fan community!
Explore cool creations, share your own, and have lots of fun together.  ~  It's all free!
AMA Plaza, Chicago
This model consists of approximately 5,500 pieces.
About this creation
AMA Plaza is located at 330 N Wabash Ave in Chicago. Formerly and colloquially known as IBM Plaza, the building was designed by architect Ludwig Mies van der Rohe as a corporate office building for IBM. Sadly, the architect did not live long enough to see its construction. The building was completed in 1973.

This is my thirty-second skyscraper model and my nineteenth Chicago skyscraper model. After two years at IIT in Chicago, I decided it was high time I made a model of a Mies building. The one clear advantage of modeling this building is that it allowed for the connecting together of several other of my Chicago skyscraper models. The model took about three weeks to design, about five days to build, and an overall month to complete. Model completed July 9, 2014.

More photos on Brickshelf

LEGO« Digital Designer file here

Overlooking the Chicago River, AMA Plaza rises to 695 ft at fifty-two stories tall. It is the second-tallest building designed by Mies and features many unique design considerations for an office building as well as many of the architect's signature design "flares." The structural system of the building was designed to accommodate raised floor systems for running electrical wiring throughout each floor; a feature that is rather uncommon among office buildings, though not surprising considering IBM was the main tenant.

The building is offset from the angled edge of the river, incorporating a spacious plaza which provides views across the river. The curtain wall fašade of the building is accented by numerous evenly-spaced wide flanges, or "I-beams," that attach to the mullions, but serve no structural purpose. This is a common design characteristic among Mies' skyscrapers, as they add ornamentation and enhance the feeling of depth to an otherwise simple, glass box. The actual structural columns are only exposed at the plaza level and the corners.

A view of the portion of the riverwalk along Wacker Dr and Heald Square, across from AMA Plaza. At street level, the minifig statuette represents a statue of Robert Morris and Haym Salomon alongside President George Washington.

The backside of the plaza where E Kinzie St lowers beneath Wabash Ave.





The design of the building's lobby is also quite characteristic of Mies' buildings. Behind the exposed structural columns, a clear, glass plane separates the interior and exterior, within which are block-like masses that house utilities and elevators. Like some of my other models, I have sought to accurately depict the captivating lobby space of this building.

Looking up from the Wabash Ave bridge. In designing this model, I decided to include vertical lines of solid black plate between the trans-black windows in an effort to convey the ornamental wide flanges on the exterior. While these small wide flanges are not extruded far enough from the building to justify the use of rail plates, I feel that the black plates help to capture this quality quite well. Additionally, the corner columns were a seemingly simple design solution: Drawing from the discovery of the use of technic axles at the "corner" of a building I had made when designing my United Building model.

Looking at just the base of the building, you can see the various goings-on of the technic axles in the SNOT surface of the plaza. The axle in the middle of the rectangular footprint simply slides into the axle hole of a 24-tooth technic gear which is attached to the bottom-most segment of the tower.

I designed the base of this model so that it would provide a seamless, geographically accurate continuation of my previous Trump-Wrigley landscape with my Marina City and 35 East Wacker models. From left to right: 35 East Wacker, Marina City, AMA Plaza, Trump International Hotel & Tower, & Wrigley Building. My first contiguous Chicago River cityscape!

I also revisited my Marina City and Trump Tower models to add their respective opposite shorelines and street levels, in order to form a seamless portrayal of the Chicago River and riverwalk.






Comments

 I like it 
  July 22, 2014
Very well done!
Rocco Buttliere
Crown Knight
  July 18, 2014
very impressive ! well done
 I like it 
  July 17, 2014
Looks great! Very professional!
 I like it 
  July 16, 2014
Yes, that again a awesome model. Excellent work and detail. My favorite pic is the last one with all buildings along the river. Very cool!
 I like it 
  July 15, 2014
wow!:D impressive!:D
 I like it 
  July 15, 2014
Wow, what a tremendous building. When you put it together with its neighbours the whole this is awesome. Terrific job.
  July 15, 2014
Really, really cool! Cant help but to think that this looks very similar to the map siege of shanghai in bf4 :P nevertheless amazing work, very clean design
 I like it 
  July 14, 2014
Superb work, as always. The shot with all of the buildings along the river is priceless.
 I like it 
  July 14, 2014
Fantastic river display!
 I like it 
  July 14, 2014
Looks fantastic, Rocco. Your Chicago river is really shaping up! As usual, can't wait to see what's next.
 
By Rocco Buttliere
Add to my favorite builders

23
people like this. See who.

961 visitors
10 comments
Added July 14, 2014
 


LEGO models my own creation MOCpages toys shop AMA Plaza, Chicago


You Your home page | LEGO creations | Favorite builders
Activity Activity | Comments | Creations
Explore Explore | Recent | Groups
MOCpages is an unofficial, fan-created website. LEGO® and the brick configuration are property of The LEGO Group, which does not sponsor, own, or endorse this site.
©2002-2014 Sean Kenney Design Inc | Privacy policy | Terms of use