1 put on the yellow flat piece with the slits in the middle of the cube piece
2 put on the handle. this will be where his leg's go.
3 put on the black handles on the light grey handle as shown.
4 put the dark grey handles on the block as shown
5 wedge the 2 light gray robot arms in the dark grey handles.
6 fit the yellow flat piece with one stud on the back of the stud.
7 fit a black Robot hand in the stud.
8 fit grey binoculers in the robot hand.
pieces for Eve
1 put the claw stud in the holes in the brick.
2 fit the top part of the tube on the bottom of the brick
3 fit the tube brick through the bottom bart of the other tube.
4 fit the head on top of the brick. The decal for Eve is very simple to do. just draw an oval's outline in black sharpie, but don't color it in yet. take a light blue sharpie and draw two verticle ovals inside the oval. then fill in the extra space in the oval with black sharpie.
1 fit one white stud on the bottom of the brick.
2 put another white stud on one of the brick's side studs.
3 fit the two handles on the sides of the brick.
4 fit the black flat piece in between the handles.
5 place the round piece on top of the brick
6 fit the red stud in the center of the round piece. the decal for M-O is from the spongebob chum bucket set I just cut part of it off.