MOCpages : Share your LEGO® creations
LEGO models my own creation MOCpages toys shop bohrok power suit instructionsBionicle
Welcome to the world's greatest LEGO fan community!
Explore cool creations, share your own, and have lots of fun together.  ~  It's all free!
bohrok power suit instructions
Rate it  12345       Add a comment Add a comment   Zoom in  Zoom in
for those who want to build the powersuit
About this creation
Somebody asked for instructions of the powersuit and for those that also want to build it here are the instructions. before you start I can tell you that it's guite handy if you have got some bohroks because there are some parts that are used quite often. the instructions consist out of 47 steps.

1

first we're making the bohrok for the power suit. it's almost like any other bohrok but it's a bit modified. note that i made a mistake with the arrow at the black 5stick it should be pointing from the 3stick
2

now finish the head like you would do with a normal bohrok
3

4

5

from this point you can finsh the bohrok like you would finish every bohrok.

now we're moving to the claws
6

make this part 4 times for 1 foot. so in total 16 times for al 4 feet
7

for 1 foot you need this part 2 times but the little 2stick should stick out a bit as you can see
here at step
8

note that the 2stick sticks out 1 time to the left and 1 time to the right per foot
9

now put 1 of the parts we made in step four against the 2stick that sticks out a bit. and put a 5stick in the part
10

this part we make 1 time for 1 foot you need a 4stick and a 5stick and 1 of the parts made in step 4
11

it should look like this now
12

now connect the parts made in step 9 and step 11 as shown.
13

it should look like this.
14

now finish the claw by puting a part made in step 8 to the other side but note that the 2stick should stick out to the middle of the claw.

that's it for the claws then you'll need them 4 times. now we move to the legs.

15

the legs aren't that hard to make and you could use any bohrok shield you like. i my self have used 2 different kinds of shields for the legs.

now we connect the legs with the claws.

16

17

it should look like this.

now we are gonna make the body but first we'll make some parts the body consists of.
18

first you need to make this part. the long stick is a 5stick, if we use this part later i wil refere to it as PART 1
19

20

PART 2 should look like this.
21

this is PART 3 the sticks are 3sticks and you need to attach a rubber band that goes trough one of the holes of the bohrok helm and then further as shown.
22

this is PART 4
23

24

here you need a part were a vahki's legs are attached to. this part is used another time so i call it PART V. you need to connect the 2 parts made in step 23 together with another part you see.
25

now make this part and connect it to the other part as shown in step 26
26

it should look like this.
27

now connect the grey part you see.
28

now connect PART 4 to the part made in step 27
29

it should look like this.
30

now grab PART 1 and PART 2 and slide PART 2 over the part made in step 29.
31

it should look like this. the put the 5stick form PART 1 into the opening you can see.
32

it should look like this from the side.
33

now make these to parts. the stick is of 5stick.
34

together the should look like this.
35

now get a PART V and add the other part shown own the picture. one 3stick is used to hold the upper part in place
36

added together it looks like this.
37

now get the part from step 34 and put it in the part from step 36.
38

it should look like this from the side.
39

now add the part from step 38 to the part from step 32 as shown.
40

now create these two parts and add them as shown in step 41.
41

it should look like this.
42

now get PART 3 and add it to the rest.
43

it should look like this.

We are almost done. now comes the part of assembling all things together.

44

get the bohrok and put him in ball form now connect him to the rest as shown.
45

if you have attached the rubber band in the right way it should hold the bohrok helmet against the body of the bohrok.
46

now connect the legs to the ball-joints that are sticking out. the last thing to do is to move his 'wings' down so that the look like the ones in the final step.
47

if you have done everything as done in the pictures then this should be your final result.






Comments

 I like it 
  January 6, 2010
Great, very creative
 I like it 
  July 8, 2008
this is very nice.I gave you a 4....
 
By Lars van der Meer
Add to my favorite builders

8
people like this. See who.

4,023 visitors
2 comments
Added July 2, 2008
 


LEGO models my own creation MOCpages toys shop bohrok power suit instructionsBionicle


You Your home page | LEGO creations | Favorite builders
Activity Activity | Comments | Creations
Explore Explore | Recent | Groups
MOCpages is an unofficial, fan-created website. LEGO® and the brick configuration are property of The LEGO Group, which does not sponsor, own, or endorse this site.
©2002-2014 Sean Kenney Design Inc | Privacy policy | Terms of use