Good job! If you need decals please check out mine. There master chief decals. If you do use them please comment!

Good job! If you need decals please check out mine. There master chief decals. If you do use them please comment!

check out brick forge space marine armour+helmet

AWESOME man! Do you use a full or half visor?

Simple, but effective, nice work

I like it, I have the mega bloks one, it is sweet!

Love the design, its simple and innovative, but it's not easy. I have yet to successfully get the visor inside, the backmost part of the visor clicks up into the helmet and a I have to pry it out, because the fornt will never go in and there wil be a gap that appears in the hole at the front of the helmet.I counted, and tried 13 times to properly insert the visor, then decided to stop before "the bullet hit the bone."

Amaizing

i love it

the joke with bob is a genuine crack up! you know with the mastercheif not showing his face ever.

Genius MC! The visor inside gives so much flexibility to the head, making it much more realistic too. Much better than SS in my oppinion even without decals.

Amasing. For all of you who cant do it, you have to inseart the back first, then pust up the front til its in, then if its not fully in, push the front from the helmet opening with a rod whilst pushing up until you hear a click. That is either the visor clicking into place, or your helmet snapping :)

i've got a small question. i made the fig and it is without a doubt the best MC. but hot do you make the helmet stick to the stud? they don't touch. i put 2 in and they just fit. and also in the picture where hes got his head tilted, is the the helm just sitting on the body or is it stuck? thanks

SO COOL1 honestly don't add decals it looks perfect as it is. Did you use the large gold visor for it/ the one from the astronaught set? because mine won't fit. ah well...

Sweet! not only is this really sturdy, but it looks awesome and you can take the visor out and it works just like normal! the only problem is you kinda gotta just cut off the sides of the visor like 1/4 of a centameter..(otherwise its really hard to put in) other than that its perfect! great job! (im not going to call you brian cuz im only 12 lol...

even if bob ran away hed be safe because those monkies stole his gun and also should 2 mongooses be called mongeese and if the warthog is shortened to the hog should a mongoose be called a goose

even if bob ran away hed be safe because those monkies stole his gun and also should 2 mongooses be called mongeese and if the warthog is shortened to the hog should a mongoose be called a goose

It's really, really good. However, I just have a question, Brian. Is it easy to take off the visor from the helmet? I want to use your method for my Manian Republic Space Command (MRSC) Special Air Service (SAS) soldier and I will give you credit, of course.

Nice! For full articulation, you can use a round hemisphere (the kind you get from the lego star wars flick missiles) I discovered this a couple years back when I put a random pieces on my gray jedi master with clone commando armor.

really cool but i wouldent have made him so tall the visors look pretty cool inside the helmet too.

nice, but he's just a bit TO freakishly tall. Check out my stuff!

love all ur creations. i love halo and ill be checkin back for more of ur stuff

Y`know if you put a rubber band around the neck it will look more fleshed out.

VERY GOOD IDEA!!! I love your pics to show the articulation too! LOL! You and Saber are definitaley the best Halo builders on this site! Hey, can you come check out my SMG? Thanks! 5/5

I absolutely love your head design! I hope you don't mind that I used it.

It's very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very very good.

how did you remove the decals from the armour? i have a bunch of those but cant remove the decals, a response would be much appreciated. Thanks

Original, as usual. BTW, you can use the domed visor, but it needs to be trimmed and turned upside down. I liked this soo much I decided to do some of my figs in this manner too, check 'em out.

how didj u bend his nek???

Very smart. I would have never thought of doing that (because I do not play, and because of fear of bending the few visors I have.

Nice brian i love the humor that you put into your MOCs the articulated head is a cool twist it gives some life to the figure nice job

Thats just sweet is a great detail ... try get some decals

The reason I don't keep the visor inside the helmet is because I think it makes his head look too small, and I can't seem to shake the impression that he's a faceless guy with trans-yellow, or in this case gold skin. But to each his own, and I have to hand it to you, this is pretty darn neat. My favorite part, however, was the eggplants. Who knew the Chief liked eggplants?

I did this and the visor got stuck... then after 10 minutes of trying to get it out it suddenly springs out and hits me in the face!!!! my lip now hurts...... Great moc though!!

a spartan tricked by a cupple of munkeys go figure

Awesome! I use a MM visor for my Master Chief!

Brilliant, I still don't get how it works with the head. Yay, BOB!!!

I hear saber-scorpion has some nece decals

I tried this and when I was squeezing the visor into the helmet, *ping* and the visor flies off into the unknown. Dang, that was my last visor, too. Great MOC, Brian.

I thought the Mars mission sets didn't come out to August.

it kinda starts to look like the Jack Stone minifigs... but the head is cool! and the comments!

Cool but i am not going to do that with my new mars mission visor im gonna stick a reguler one in and colour it lawls

and another amazing creation from Brian Kescenovitz. wow.

Its amazing the coincidences that seem to occur with the experimentation of lego parts. It always seems to fit somehow...Anyway, this design is consistent with your other design in the way that it seems fragile but looks awesome! You never seem to run out of ways to push the envelope! One again, Great job. P.S. I cant believe you didnt snap that little visor! lol

LOL,nice. How did you get a plain green body plate?

Well, you had one more in you! Very nice addition. I like how the chief's head is slightly revealed, very exciting.

Its looking good, as always, but I like mine with the visor on the outside...

As always, All your creations are perfect, and now, THE CHIEF IS PERFECT! Can you go check out my poa teaser?

pretty sweet but one question how did u get the head 2 move up and down?

The Carbine... is... Awesome... Could you help me with adding pictures to my pages? (E-mail me please).