| |
|
Car-Transporter . This huge car-transporter is made from the LEGO Sets 8258 and 8285. . This huge car-transporter is made from the LEGO Sets 8258 and 8285, except from the PF IR-Receiver, PF M Motor, PF XL Motor and a PF Remote-Control.
Specs:
6 PF Functions
4 Manual Functions
2760 parts
3,350 kg
134 cm
The Outside:
This cabin looks very similar to the cabin of the 8258 A-model, but I've changed a lot of small details. Also the interior is different:
The footboards are marked with blue pins:
The back-side of the truck, on the other hand, is totally my own design:
Also the front- and back-side of the second carriage is totally my own design:
There are also some nice details in the second carriage:
The Functions:
Manual:
The first function is a pneumatic rotating dividing wall. Behind this wall lays the PF Battery-box. Behind the first left side compartment is the pneumatic pump and a switch is positioned above it. By rotating the wall, you can take the PF Battery-box out more easily:
Two other manual functions are the winches. For the lower winch, the button is behind the first left side compartment and a release switch is behind the first right side compartment. For the upper winch, the button is behind the second right side compartment and a release switch is left to the winch:
The last manual function is in the rear part of the truck. Behind the first left side compartment is a button and when you turn it, it will put out a pair of beams and make the truck stand on its own legs:
Power Functions:
InfraRed:
The IR-Receiver is in the middle of the truck:
Via IR, you can steer:
And drive (4-Wheel-Drive):
With the switch:
The motor is positioned in the chassis of the truck and right after it, there is immediately a gear-switch. This switch is operated from the second right side compartment:
When the switch is turned to the rear of the truck and the electricity is turned on by the electric switch behind the first right side compartment, a linear actuator will put down a pair of driveboards and a car can be pulled on the truck by the winch:
When the switch is turned to the front of the truck and the electricity is turned on by the electric switch behind the first right side compartment, a pair of beams will put down the upper level of driveboards. This pair of beams is geared down by a worm wheel:
With the same motor, you also can operate the functions in the second carriage. The axle in the motor is lengthened and a homo-kinetic connection is used to make a hinge. Behind the first right side compartment is a switch:
When the switch is turned to the rear of the truck and the electricity is turned on by the electric switch behind the first right side compartment, a linear actuator will put down a pair of driveboards and a car can be pulled on the second carriage by the winch:
When the switch is turned to the front of the truck and the electricity is turned on by the electric switch behind the first right side compartment, a pair of beams will put down the upper level of driveboards. This pair of beams is geared down by a worm wheel:
Movie:
This is the movie:
The yellow jeep in the movie is also made out of the 2 used sets.
Thanks for watching and HAVE FUN!
techn0m0ves
|
